Welcome![Sign In][Sign Up]
Location:
Search - usb flash

Search list

[Embeded Linuxlinux-wlan-ng-0.2.3.tar

Description: uClinux2.6上兼容PRISM2.0芯片组的USB设备驱动程序.-uClinux2.6 on PRISM2.0 chipset compatible with the USB driver.
Platform: | Size: 1148928 | Author: 马骥 | Hits:

[Other Embeded programUSBdiskRW

Description: 在NandFlash上实现了U盘的读写。支持1.0-NandFlash achieved in the U disk read and write. Support 1.0
Platform: | Size: 444416 | Author: zzh | Hits:

[Other Embeded programSMDK2440USBdownloaderFirmware

Description: 三星CPUS3C2440,SMDK2440 USB downloader firmware代码,通过USB下载文件到FLASH-Samsung CPUS3C2440, SMDK2440 USB downloader firmware code, through the USB to download files to the FLASH
Platform: | Size: 432128 | Author: 林钢 | Hits:

[ARM-PowerPC-ColdFire-MIPSS3C2410_BIOS

Description: 第一版YL2410开发板的BIOS 功能比较简单,上电之后,LCD显示蓝色、绿色、红色三个竖条 同时串口显示如下: Power on reset ************************************ * * * YL2410 Board BIOS V2006 * * Http://www.ucdragon.com * * * ************************************ NAND Flash Boot Please select function : 0 : USB download file(通过USB下载文件) 1 : Uart download file(通过串口下载文件) 2 : Write Nand flash with download file(将下载的文件烧写到NandFlash) 3 : Load Pragram from Nand flash and run(从NandFlash装载文件并运行) 4 : Erase Nand flash regions(擦除NandFlash区域) 5 : Write NOR flash with download file(将下载的文件烧写到NorFlash) 6 : Set boot params(设置Linux启动相关参数) 7 : Set AutoBoot parameter,1:linux 2:wince(设置WINCE自启动) -Commentator YL2410 development board BIOS functions are relatively simple, electricity, LCD blue, green, red and three vertical lines while serial is shown below : Power on reset***************************************************** YL2410 Board BIOS V2006** Http :// www.ucdragon.com************** Attention duty announcers NAND Flash Boot Please sele ct function : 0 : USB download file (through USB download) 1 : Uart download file (via serial port download) 2 : Write Nand flash with download file (download the burning of documents NandFlash) 3 : Load Pragram from Nand flash and run (from NandFlas h load and run) 4 : Erase Nand flash regions (erasure NandFlash regional) 5 : Write NOR flash with download file (download the document to the burning N orFlash) 6 : Set boot params (i
Platform: | Size: 408576 | Author: wind | Hits:

[Embeded-SCM DevelopUSBJTAGICE(DIY).RAR

Description: USB接口的JTAGICE(DIY)文档,我觉的还是不错的资料,大家好好学习一下-USB JTAGICE (DIY) documentation, I think the information is good, We learn!
Platform: | Size: 167936 | Author: wangxing | Hits:

[ARM-PowerPC-ColdFire-MIPS44b0X_Board_schematic_and_program

Description: 44b0X开发板 CPU:S3C44B0X FLASH:HY29LV160BT 2M SDRAM:HY57V641620 8M 2 COM USB1.1 PDIUSBD12 NET RTL8019AS JTAG 14PIN LCD 接口 4 KEY-44b0X development board CPU : S3C44B0X FLASH : HY29LV160BT 2M SDRAM : HY57V641620 8M two COM USB1.1 PDIUSBD12 NET RTL80 19AS JTAG interface LCD 14PIN 4 KEY
Platform: | Size: 1082368 | Author: 邹枫 | Hits:

[ARM-PowerPC-ColdFire-MIPSusb_44b0

Description: 基于44b0和三星的nand-flash k9f5608的u盘开发-44b0-based and Samsung nand-flash k9f5608 the u disk development
Platform: | Size: 217088 | Author: 黎明 | Hits:

[ARM-PowerPC-ColdFire-MIPSArmFlashTest

Description: This a simple bootloader for AT91SAM7{S,X}{64,128,256} processors. It permits you to download new code to the device over USB. This bootrom is installed at address 0x00000000 in the ARM, which means that it is the first piece of code to execute after reset. At startup, it waits for a few seconds to see if the downloader is trying to connect. If not, then the bootloader gives up control and jumps to your program. If the downloader is trying to connect, then the bootloader receives the new program over USB and writes it into flash.
Platform: | Size: 39936 | Author: jackywen | Hits:

[Documentslinux_usb_driver

Description: 实现基于S3C2410处理器的系统板与PC机通过USB接口进行互联,通过PC机访问和控制嵌入式开发板上的FLASH存储器。 以往访问嵌入式主机板上的存储器通过串口或者网口通过键入Linux命令来完成,不但速度低,而且对硬件环境和操作者有严格要求(会Linux系统命令),通过此课题可以提升开发产品档次,使普通用户也可以对开发板上的FLASH存储器进行管理,速度上有一定提高,使用了主流的USB接口,方便以后的更新、升级,达到了缩短产品的开发周期和降低了开发难度,节约成本的目的。因此,此课题具有很深远的研究开发意义。
Platform: | Size: 274432 | Author: 王强 | Hits:

[ARM-PowerPC-ColdFire-MIPSFS44B0XI_Test

Description: ARM7处理器的系统测试源码,汇编和C组成,具有norflash、nandflash、sdram、LCD、IIC、232、NET、USB、RLT等功能,可组成一个完整的处理终端,当然要有相应的硬件支持,供大家参考!-ARM7 processor system testing source code, compile and C composed norflash, nandflash, sdram, LCD, IIC, 232, NET, USB, RLT and other functions, can handle a complete end, of course, have corresponding hardware support for your information!
Platform: | Size: 1299456 | Author: 牧羊犬 | Hits:

[SCMAtmeag162+k9f5608+pdiusbd12

Description: 采用Atmeag162单片机来制作的U盘程序源码,FLASH芯片:k9f5608,USB芯片:pdiusbd12
Platform: | Size: 162816 | Author: 徐铭泽 | Hits:

[Linux-Unix317s64

Description: S64是atmel公司的一块ARM7处理器,价格低廉,16k RAM 64K flash,带USB接口,是ARM入门的好选择,这个是它的电路图,protel的-S64 is a piece of Atmel
Platform: | Size: 300032 | Author: wang | Hits:

[Other364-44902-LPC2378

Description: Single-chip 16-bit/32-bit microcontroller 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit
Platform: | Size: 185344 | Author: Lee Ka Wing | Hits:

[ARM-PowerPC-ColdFire-MIPSS3C2410_BIOS_V2

Description: NAND Flash Boot Please select function : 0 : USB download file(通过USB下载文件) 1 : Uart download file(通过串口下载文件) 2 : Write Nand flash with download file(将下载的文件烧写到NandFlash) 3 : Load Pragram from Nand flash and run(从NandFlash装载文件并运行) 4 : Erase Nand flash regions(擦除NandFlash区域) 5 : Write NOR flash with download file(将下载的文件烧写到NorFlash) 6 : Set boot params(设置Linux启动相关参数) 7 : Set AutoBoot parameter,1:linux 2:wince(设置WINCE自启动)-NAND Flash BootPlease select function: 0: USB download file (through the USB to download files) 1: Uart download file (through the serial port to download files) 2: Write Nand flash with download file (the downloaded file to the programmer NandFlash) 3: Load Pragram from Nand flash and run (from the NANDFLASH loading files and running) 4: Erase Nand flash regions (Erase the NANDFLASH region) 5: Write NOR flash with download file (the downloaded file to the programmer NorFlash) 6: Set boot params ( Linux set to start the relevant parameters) 7: Set AutoBoot parameter, 1: linux 2: wince (set up since the launch of WINCE)
Platform: | Size: 409600 | Author: yang | Hits:

[OtherDSP6713

Description: Ti TMS320C6713 DSK的测试程序,全部代码都有.包括BOOT,CODEC,EDMA,EEPROM,FLASH,GPIO,SDRAM,Timer,UART,USB等-Ti TMS320C6713 DSK test procedures, all of the code are. Including BOOT, CODEC, EDMA, EEPROM, FLASH, GPIO, SDRAM, Timer, UART, USB, etc.
Platform: | Size: 1972224 | Author: chenfei | Hits:

[ARM-PowerPC-ColdFire-MIPSS3C2410_USB_Device

Description: Flash做U盘设备,可以在傅立叶2410开发板上正确运行,对USB开发者有一定帮助。-Flash did U disk devices can be developed in Fourier 2410 board functioning correctly, the USB developers have some help.
Platform: | Size: 65536 | Author: 丁后兴 | Hits:

[Windows CEdemo_test

Description: 可以在linux和wince下运行,包括串口、usb、sdrsm\flash\rtc,网口等测试,是开发人员的好帮手。-Can run under linux and wince, including serial, usb, sdrsm lash tc, the mouth, such as network testing, is the developer of a good helper.
Platform: | Size: 1052672 | Author: 王月 | Hits:

[Embeded Linuxvivi

Description: vivi是MIZI公司开发的系统引导程序,原本只支持串口下载。本文以S3C2410处理器加CS8900网络芯片为例,介绍一种在vivi基础上增加网络支持的设计方法,使vivi能够通过TFTP下载文件,可以有效地缩短系统的开发周期,方便用户使用。 关键词 vivi Bootloader TFTP协议 网络功能扩展   随着嵌入式的发展,基于ARM的系统越来越流行。在开发ARM系统时,第一步就是要选择一种合适的Bootloader。目前网络上可得到的Bootloader很多,一般几十KB,所以除非要求把Bootloader限制在几KB以内,否则没有必要自己去写一个Bootloader。Bootloader一般存放在Flash中。当前主流的Flash分为NOR Flash和NAND Flash。前者价格比后者高出很多,而性能相差无几。如果系统采用的是NAND Flash,那么vivi可能会是一个好的选择。-err
Platform: | Size: 504832 | Author: | Hits:

[ARM-PowerPC-ColdFire-MIPS2410-test

Description: 利宇泰s3c2410开发板测试程序,包括BUS,UART,RTC,USB,DMA,FLASH-Lee Yu-tai S3C2410 development board testing procedures, including BUS, UART, RTC, USB, DMA, FLASH
Platform: | Size: 2037760 | Author: ych | Hits:

[Embeded-SCM Developout

Description: pic18f4550 作的USB BULK传输,理论可到1MB/S,600H FLASH空间-pic18f4550 for USB BULK transmission, the theory can be 1MB/S, 600H FLASH space
Platform: | Size: 247808 | Author: lzy | Hits:
« 1 2 3 4 56 7 8 9 10 ... 22 »

CodeBus www.codebus.net